Votes - 3, Average rating: 4 ( )

User manual Vitek, model VT-4023 BN

Manafacture: Vitek
File size: 248.99 kb
File name: Vitek-VT-4023_BN-Pdf-Rus.Pdf
Language of manual:ruukende
Free link for this manual available at the bottom of the page

manual abstract

Set the subwoofer's volume level to the very minimum before turning it on. 1. Connect the wires for the front left and right satellite speakers, the center speaker, and the rear left and right satellite speakers to the output jacks on the rear panel of the subwoofer, which are marked FR, FL, CEN, RP, RL (see figure 2). 2. Connect an audio cable to the corresponding jacks on the connecting device (for example, a DVD player); and the opposite end of the cable to the corresponding audio input jacks on the rear panel of the subwoofer (see figure 2). 3. Connect the power cord to the electrical outlet and flip the power switch, located on the rear panel of the subwoofer, to the ON position. Turn on the input device connected to the subwoofer and use the volume control knob to set the desired volume levels on the subwoofers channels. RESOLVING MALFUNCTIONS 1. No sound. Make sure that all the connections are correct, and also that all the audio cables are connected firmly 2. Low frequency (bass) sound is missing. Set the desired bass level. 3. Not all of the speakers work. Check all the connections between the speakers and the subwoofer or connect a different audio source. PRECAUTIONARY MEASURES: Attention: Please carefully read the points listed below to ensure safe use of the device. 1. Read the instructions - The safety instructions and operating rules should be read before using the device. 2. Save the instructions - Save the instructions for future use. 3. Follow the operating rules - All of the safety instructions should be followed. 4. Warning symbols - Heed the indications of all warning symbols located on the device's panels or in these instructions. 5. Power source - The device should only be connected to a power source with the characteristics indicated on the rear panel of the device or in these instructions. 6. Protecting the power cord - The power cord should be laid out in such a way that it will not be damaged by external items or its surroundings. 7. Water and moisture - Do not use the device near reservoirs of water (for example, bath tubs, sinks, etc). 8. Ventilation - Install the device in a well ventilated room. Do not Install the device on couches, beds or carpets because the device's ventilation may be blocked. 9. The effects of heat - Do not install the device near heat sources (for example, radiators, kitchen stoves, etc). 10. Periods of non-use - if the device will not be used for a long period of time, disconnect the power plug from the electrical outlet. 11. The need for maintenance - Utilize the services of qualified technicians if: • The power cord is damaged; or • The device body is damaged; or • The device was subjected to rain; or • The device is not functioning properly; or • The device was subjected to shock. 12. Repair service - The consumer should not attempt to repair the device himself. Use only the services of a qualified technician. 13. Clean the device with a dry, soft clothe only...

Other models in this manual:
Speakers & Subwoofers - VT-4023 (248.96 kb)


Your review
Your name:
Please, enter two numbers from picture: