Votes - 7, Average rating: 3.3 ( )

User manual Hyundai, model H-CMD4002

Manafacture: Hyundai
File size: 1.02 mb
File name: Hyundai-H-CMD4002-Pdf-Rus.Pdf
Language of manual:ruen
Free link for this manual available at the bottom of the page

manual abstract

To store a station: - Select a band (if needed) - Select a station by 9/ : buttons - Hold a Preset button (1-6) which you want store the station for at least 2 seconds. . To recall a station: - Select a band (if needed) - Press a Preset button (1-6) briefly to recall the stored station OR: During radio mode press the 9/ : buttons to select downward or upward stored stations. 16 AMS (Auto Memory Store) function . Preset scan: press AMS button on the front panel or AMS/RPT on the RC to scan all preset stations in the memory of the current band and stay on each memory stations for about 5 seconds. The memory location indicator on the LCD will flash during the process. To stop preset scan, press this button again. . Auto memory store: press AMS button on the front panel or AMS/RPT on the RC for more than 2 seconds to enter auto store mode. The radio will automatically store the 6 strongest available stations to the 6 preset memories of the current band. To stop auto store, press this button again. AF (Alternative Frequencies) function When the radio signal strength is poor, enabling the AF function will allow the unit to automatically search another station with the same PI (Program Identification) as the current station but with stronger signal strength. PS (Program Service name): the name of station will be display instead of frequency. 1. Press R/L/ST / AF on the front panel or LOC/AF on the RC shortly to turn ON or turn OFF the AF function. AF indicator on display will flash until RDS information is received. 2. If RDS service is not available in your area, turn off the AF mode. Default setting is ON. TA (Traffic Alarm) function Press the LOU/TA on the front panel or BND/TA/SYS on the RC and hold for 2 seconds to turn ON or OFF the TA function. In TA mode traffic program will be automatically searched, until the program is received. When traffic announcement is received, the TA indicator will display. The unit will temporarily switch to the tuner mode (regardless of the current mode) and begin broadcasting the announcement at TA volume level. After the traffic announcement is over, it will return to the previous mode and volume level. When TA is turned on, SEEK, SCAN, AMS function can only be received or saved when traffic program identification (TP) code is received. 17 PTY (Program Type) 1. Press PTY/MUT button to activate the PTY function. The previous PTY type is shown. 2. Press PTY once again to enter the MUSIC type or press twice to enter the SPEECH type, then use buttons 1 - 6 to select the desired program type (see the following table). Button Number Music Group Speech Group 1 POP,ROCK NEWS, AFFAIRS, INFO 2 EASY, LIGHT SPORT EDUCATE, DRAMA 3 CLASSICS, CULTURE SCIENCE VAR IE D 4 JAZZ, COUNTRY WEATHER,FINANCE, CHILDREN 5 NATION, OLDIES SOCIAL RELIGION, PHONE IN G FOLK TRAVEL, LEISURE, DOCUMENT 3. When PTY is selected, the radio starts to search corresponding PTY information, and stops if the corresponding PTY information is detected. If there are no keys entered for 2 seconds, previously selected PTY is searched. During 1 loop, if desired PTY is not found, NO PTY is flashed, then return to previous normal radio and PTY word disappears. 4. Press PTY button for the 3rd time to switch the PTY function off. 18 TV operations TV tuning At first, press MODE button to switch the set to TV mode, then press AMS/RPT to auto-scan TV station from low frequency to high frequency and TV station will be automatically stored in to memory. When Auto-Tuning is done, you can use the remote control 0-9 key to select your desired station. For TV Tuning in SECAM please kindly pay attention as per follows: Press the MODE button and then press the R/L button to switch to PAL DK audio system. Press the BND button in SECAM audio system to switch to SECAM DK audio system. After that press the button AMS/RPT to scan and search the TV stations in the SECAM system. SD/ MMC/ USB operations Inserting the SD/ MMC card/ USB device 1. Turn the power on. 2. Press the OPEN button on the panel to flip it down. 3. Insert the MMC/ SD card or USB device into MMC/ SD or USB slot. Then the playing mode will be changed into SD Card or USB mode automatically. The unit will read the files automatically. Note: When SD/MMC card and USB device are both inserted into their compartment or socket, the mechanism will automatically engage into the SD mode. 19 USB/SD/MMC notes: USB functions (flash memory type) MP3 music play. 1. SD/ MMC card support. 2. USB flash memory 2in1 (SD/ MMC) support. 3. FAT 16/ FAT 32 is possible - FAT 16 (dir: 200 support, file:500 support), - FAT 32 (dir: 200 support, file:500 support). 4. Filename: 32 byte/ Dir name: 32byte. 5. Tag (id3 tag ver2. 0) - Title/ Artist/ Album: 32 byte support. 6. Multi card reader not support. 7. USB 1.1, 2.0 support. Note: USB format supports 1.1, 2.0. Capacity: 8 MB ~ 1 GB. SD cards brands: Cannon, Fuji film, Palm, Motorola, Microso...


Your review
Your name:
Please, enter two numbers from picture: