Votes - 3, Average rating: 3.3 ( )

User manual Dremel, model MOTO-TOOL 275

Manafacture: Dremel
File size: 849.17 kb
File name: 7ef4bcfb-0798-403c-907e-8da1a4698ebb.pdf
Language of manual:en
Free link for this manual available at the bottom of the page

manual abstract

It will give youtips on some of the many different do-it-yourself jobs the tool will perform around your home and workshop. WARNING For your own safety read your Owner's Manual assembly • operation • safety instructions. before operating your Dremel Moto-Tool OREMEL _.o.,o_ _ Racine, Wisconsin 53401 1/88 PRINTED IN U.S.A. 5296077 When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, For Your Safety... electric shock, and personal injury, including the following: READ AND 1. Keep work area clean --Cluttered areas and benches invite injuries. 2. Avoid dangerous environment --Don't expose tools to rain. Don't use power tools in damporwetlocations. Don't use power tools in the presence of flammable liquids or gases. Avoid chemical or corrosive environments Keep work area welt lit. 3. Guard against electric shock --Prevent body contact with grounded surfaces. For example: pipes, radiators, refrigerator enclosures. 4. Keep children away --Do not let visitors contact tool or extension cord. All visitors should be kept away from work areas. 5o Store idle tools --When not in use, tools should be stored in dry, and high or locked- up place -out of reach of children. 6. Don't force t,:ol --It will do the job better and safer at the rate for which it was intended. 7. Use right tool -Don't force small tool or attachment to do the job of a heavy-duty tool. Don't use tool for purpose not intended -for example -don't use circular saw for cutting tree limbs or logs. 8, Dress properly _ Do not wear loose clothing or jewetry. They can becaught in moving parts. Rubber gloves and non-skid footwear are recommended when worR.ing outdoors. Wear protective hair coyering to contain long hair. 9. Use safety glasses --Also use face or dust mask if cutting operation is dusty. SAVE ALL THE FOLLOWING INSTRUCTIONS: 10. Don't abuse cord --Never carry tool by cord or yank it to disconnect from receptacle. Keep cord from t_eat, oil, and sharp edges. 11. Secure work --Use clamps or vise to hold work. It's safer than using your hand and it frees both hands to operate tool. 12. Don't over-reach _ Keep proper footingand balance at all times, 13. Maintain tools with care --Keep tools sharp and clean for be_er and safer performance. Follow instructions for lubricating and changing accessories. Inspect tool cords periodically and if damaged, have repaired, by authorized service facility. Inspect extension cords periodically and replace if damaged. Keep handles dry, clean, and free from oil and grease. 14. Disconnect tools --Wh en not in use, before servicing, and when ohanging accessories, such as blades, bit, cutters. 15. Remove adjusting keys and wrenches-Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 16. Avoid unintentional starting --Don't carry plugged-in tool with finger on switch. Be sure switch is off when plugged in. 17. Outdoor use extension cords --When tool is used outdoors, use only extension cords intended for use outdoors and so marked. 18. Stay alert --Watch what you are doing. Use common sense. Do not operate tool when you are tired. Don't use power tools after taking drugs, alcohol or medications. 19, Do not alter or misuse tool --These tools are precision built. Any alteration or modification not specified is misuse and may result in a dangerous condition. 20. Avoid gaseous areas --Do not operate portable electric tools ingaseous or explosive atmospheres, Motors in these tools normally spark, and the sparks might ignite fumes. 21 Check for damaged parts--before further use of the toot, check for damaged parts. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A part that is damaged should be properly repaired or replaced by authorized service center before further use of the tool. Have defective switches replaced by authorized service center. Do not use tool if switch does not turn it on and off. 22. Your tool is double insulated --And no grounding is necessary. The tool is equipped with a two wire cord and two prong plug which can be used instandard 120 volt A.C° curriers. Use only identical replacement part= when service is required. 23. EXTENSION CORDS -An undersize cord will cause a drop in line voltage, resulting in toss of power and over-heating. Use 18 gauge or heavier cord. NOTE: The smaller the gauge number, the heavier the cord. (Extension cords are available.) 24. WARNING: Use of damaged cords can shock, burn orelectrocute. READ AND SAVE ALL THE PRECEDING INSTRUCTIONS Dremel Limited Warranty Your Dremet product is warranted against defective material or workmanship for a period of one year from date of purchase. In the event of a failure of a product to conform to this written warranty you should return the product, along with proof of purchase date and a written statement about the nature of the problem, to: Drem...

Other models in this manual:
Power Screwdrivers and Drills - MOTO-TOOL 285 (849.17 kb)
Power Screwdrivers and Drills - MOTO-TOOL 395 (849.17 kb)


Your review
Your name:
Please, enter two numbers from picture: