Login:

Kreg Tool PRS1020

downloaded: 18File size: 4 mb    Manafacture: Kreg Tool  
Category: Laminate Trimmers

Locate the two Support Struts (#7) and align them to the pre-drilled holes in the bottom of the Router Table Top. Mount the struts to the top using the eight .” Coarse Thread Screws (#16). Be careful not to over tighten. Note: To avoid damaging the table’s surface, be sure not to use the longer 1-1/4” screws (#11) on this step. Use the curved tab on the Insert Plate Levelers (#8) to locate each Leveler in the corner of the Insert Plate opening and fasten them in to place using three 1-1/4” coars





Category