Login:
Sorted: Name ↑   Downloads   Rate   Size ↑  

Snap-On 870016

downloaded: 0File size: 1 mb    Manafacture: Snap-On  
Category: Nail Guns

, U.S.A., WHICH DOES NOT MANUFACTURE OR DISTRIBUTE THIS PRODUCT. CONSUMER INQUIRES SHOULD BE DIRECTED TO: ©COPYRIGHT 2007 ALLTRADE TOOLS, LLC. 1431 VIA PLATA LONG BEACH, CA 90810- 870016 – 18 Gauge 18 GAUGE 1-1/4" BRAD NAILERINSTRUCTION MANUAL THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION, MAINTENANCE AND STORAGE OF THIS PRODUCT. BEFORE USE, READ CAREFULLY AND UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT LABELS. FAILURE TO DO SO COULD RESULT IN SERIOUS PER

Snap-On 870013

downloaded: 0File size: 1 mb    Manafacture: Snap-On  
Category: Nail Guns

Always use clean, dry compressed air with a maximum pressure of 200 psi. Use a pressure regulator and set the pressure between 70 – 120 psi. (5.0 – 8.5 kg/cm2G). Before each use, check the pressure regulator to ensure it is functioning within the proper pressure range. Using an air pressure of more than 120 psi can cause the angled finish nailer to malfunction or possibly explode causing severe injury or property damage. SELECTING A PROPER AIR HOSE Use an air hose with the largest diameter and s

Snap-On 870011

downloaded: 1File size: 1 mb    Manafacture: Snap-On  
Category: Nail Guns

Failure to comply with this warning can result in serious or permanent injury or even death to the operator or to bystanders. Do not drive nails on top of other nails. Do not operate the clipped head nailer at too steep of an angle. Nails can ricochet. Failure to comply can result in serious injury or even death to the operator or bystanders. Do not modify the clipped head nailer in any way. Unauthorized alterations can jeopardize safety in the tool’s operation. Failure to follow this precaution

Snap-On 870010

downloaded: 0File size: 1 mb    Manafacture: Snap-On  
Category: Nail Guns

See Figure 8. 15 16 Figure 8 Figure 7 Figure 9 Figure 10 MANDATORY MAINTENANCE All maintenance and repairs should be performed by an authorized repair facility. Call 1-888-278-8092 to obtain a list of repair facilities in your area or to make arrangements to return the tool for service. ACTION REASON OPERATION TROUBLESHOOTING Most minor problems can be resolved quickly and easily using the troubleshooting table below. For problems that cannot be solved, contact Customer Service (toll free) at 1-





Category