Login:
Votes - 0, Average rating: 0 ( )

User manual Philips, model HD5730/10

Manafacture: Philips
File size: 7.83 mb
File name:
Language of manual:svendafi
Free link for this manual available at the bottom of the page



manual abstract


Producing hot water 1 Attach the hot water spout to the nozzle. 2 Place a cup under the hot water spout. EnglisH 17 3 Press the button for hot water. The display reads ‘HOT WATER’ and 125ml of hot water comes out , of the hot water spout. Do not use the hot water function for more than 2 minutes at a time. Changing the quantity of hot water The appliance is preset to produce 125ml hot water.You can change this quantity as follows: 1 Attach the hot water spout to the nozzle. 2 Place a cup under the spout. 3 Press the button for hot water until the message ‘PROGRAM TO SET VOL - HOT WATER’ appears on the display and then release it. Hot water comes out of the hot water spout. ,4 When the water in the cup reaches the required level, press the button for hot water again to set the new quantity. ’SETTING DONE’ appears on the display.The appliance now , produces the set quantity until you change it again. Adjusting the coffee mill The coffee grinder is preset to the correct coarseness and should not require frequent adjustment.You can select a coarser setting for less foam, a normal aroma and faster brewing.You can select a finer setting for more foam, a more intense aroma and slower brewing. Only turn the grinding coarseness knob when the coffee mill is grinding. 18 EnglisH -To select a coarser setting, turn the grinding coarseness knob 1 setting clockwise (‘click’). -To select a finer setting, turn the grinding coarseness knob 1 setting anticlockwise (‘click’). Do not turn the grinding coarseness knob anticlockwise too far, otherwise the coffee may come out of the spout in drops when you brew 2 cups. The adjustment only becomes noticeable after you have brewed at least 2 cups of coffee. Setting menu parameters When you have switched on the appliance and the appliance is ready for use, you can access the menu to perform cer tain actions and modify cer tain parameters. -Flushing -Descaling -Setting coffee temperature -Setting auto-on time -Setting auto-off time -Setting current time -Cleaning -Setting water hardness -Setting language -Resetting to default settings You can press the MENU button at any time to exit the menu, except in the descaling or cleaning modes. If you have selected one of these modes and pressed OK, you have to switch off the appliance if you want to exit the menu. Menu structure Menu structure Submenu START FLUSHING? (flushing procedure starts) START DESCALING? (descaling procedure starts) SET TEMPERATURE? TEMPERATURE: Low Medium High EnglisH 19 Menu structure Submenu SET AUTO-ON? AUTO-ON: Disabled 0:00 SET AUTO-OFF? After 1 hour After 2 hours After 3 hours SET CURRENT TIME? 0:00 START CLEANING? (cleaning procedure starts) SET WATER HARDNESS? Hardness 1 Hardness 2 Hardness 3 Hardness 4 SET LANGUAGE? English Deutsch Nederlands Francais Espanol Suomi Svenska RESET TO DEFAULT? (resetting procedure starts) Flushing 1 ,2 3 Press the MENU button. The button lights up. The message ‘START FLUSHING?’ appears on the display. Place a cup under the coffee spout and press the OK button. Descaling Over time, the continuous heating up of the water that is used to make the coffee leads to scale build-up in the inner circuits of the appliance. When the message ‘PLEASE DESCALE!’ appears on the display, you should run the descaling program. Proceed as follows: 1 Press the MENU button. 20 EnglisH ,2 3 The button lights up. Press the ^ button until the message ‘START DESCALING?’ appears on the display. Press the OK button. The message ‘ADD DESCALER! - Push OK when ready’ appears on , the display. 4 When you descale the appliance for the first time, use the descaler supplied with the appliance. Fill the water tank with the descaler and 1 litre of water. If you use a different descaler, follow the instructions on the package of the descaler. Note: Use the descaler supplied with the appliance or a liquid descaler based on citric acid. Never use a descaler with acetic acid, as this will damage the appliance. Note: Be careful not to spill descaler on the metal surfaces of the machine and on surfaces sensitive to acid such as marble, limestone and glaze. If you spill descaler on these surfaces, immediately wipe it off with a cloth to prevent stains. 5 6 7 Attach the hot water spout to the nozzle. Place a bowl with a minimum capacity of 1.5 litres under the hot water spout. Press the OK button to start the descaling program. Descaler comes out of the hot water spout and flows into the bowl , below.The message ‘DESCALING’ is shown on the display. During the descaling program, the appliance pauses a few times to , remove scale deposits from the inside of the espresso maker. After about 35 minutes, the message ‘DESCALE DONE - Push OK , when ready’ appears on the display. You now have to flush the appliance to remove descaler residues from the inside of the appliance. Proceed as follows: 8 9 Empty the water tank, rinse it and fill it with fresh water. Reinsert the water tank. 10 Empty the full bowl and then put it back unde...

Other models in this manual:
Coffee Makers - HD5730/11 (7.83 mb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category