Login:
Votes - 1, Average rating: 4 ( )

User manual Philips, model MC148/22

Manafacture: Philips
File size: 644.64 kb
File name:
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


If it does not, consult your dealer or service centre. 2 If your set is equipped with a voltage selector, adjust the selector so that it matches with the local mains. 3 Connect the mains lead to the wall socket and the set is now ready for use. ™ The display lights up briefly and the clock display flashes. You will need to set the time. 4 To disconnect the set from the mains completely, remove the plug from the wall socket. For users in the UK, please follow the instructions on page 2. POWER-SAVING AUTOMATIC STANDBY As a power-saving feature, the unit automatically switches to standby 15 minutes after a tape or CD has reached the end and no control is operated. Safety information • Place the set on a hard and flat surface so that the system does not tilt. Make sure there is adequate ventilation to prevent the system from overheating. • The mechanical parts of the set contain self-lubricating bearings and must not be oiled or lubricated. This set complies with the radio interference requirements of the EU. 5 BASIC FUNCTIONS English TIMERCDPROGRAM M C 1 4 8 MICR O SY S T E M OPEN•CLOSE VOLUME INCREDIBLESURROUND DBB DSC INTERACTIVE SOUND STANDBYON TIMERON • OFF PROGRAMSELECT PRESET RECORD PLAY• PAUSE TUNING STOP TUNING RDS NEWSCLOCK SHUFFLE REPEAT REVMODEBAND SIDEA/B IRSENSOR NEXT PREV Switching on There are 3 ways to switch the set on: • press y STANDBY ON on the set and the last selected source switches on; • press SELECT SOURCE on the set and the last selected source switches on; • press CD, TUNER, TAPE or AUX on the remote control. To switch the set to standby, press y STANDBY ON once on the set ( y on the remote control) – The volume level, interactive sound settings, last selected source and tuner presets will be retained in the set's memory. 6 MC 148 / 22 page 6 Adjusting volume and sound 1 Turn the VOLUME control anti-clockwise to decrease or clockwise to increase volume on the set (or press VOLUME –, + on the remote control). ™ Display shows the volume level VOL and a number from 0-32. 2 Press the Interactive sound control, DSC on the set or remote control once or more to select the desired sound effect: OPTIMAL (no indication) /ROCK ( ) /JAZZ ( ) /POP ( ) /OPTIMAL.... 3 Press DBB to switch bass enhancement on or off. ™ Display shows: DBB if the DBB is activated. 4 Press INCREDIBLE SURROUND (INC. SURR. on the remote control) to switch the surround sound effect on or off. ™ Display shows: if activated. Note: The effect of INCREDIBLE SURROUND may vary with different types of music. 5 Press MUTE on the remote control to interrupt sound reproduction instantly. – Playback will be continued without sound and the display shows MUTE. • To activate sound reproduction you can: – press MUTE again; – adjust the volume controls; – change source CLOCK Setting the clock There are two possible methods for setting the clock: manually or automatically by using RDS. Automatic clock setting (RDS versions only) 1 Tune to a RDS station (see DIGITAL TUNER). 2 Press RDS/ CLOCK for 2 seconds or more. ™ SEARCH RDS TIME is displayed for a maximum of 90 seconds; the time is then displayed. ™ NO RDS TIME is displayed if no time signal has been received and you will have to set the clock manually. Manual clock setting 1 In standby, press RDS/ CLOCK. ™ The clock digits for the hours flash. 2 Turn VOLUME to set the hours: clockwise for hours up; anti-clockwise for hours down. 3 Press RDS/ CLOCK again. ™ The clock digits for the minutes flash. 4 Turn VOLUME to set the minutes: clockwise for minutes up; anti-clockwise for minutes down. 5 Press RDS/ CLOCK to confirm the time. TIMER, SLEEP VOLUME INCREDIBLESURROUND DBB DSC INTERACTIVE SOUND TIMERON • OFF PROGRAMSELECT PRESET RECORD PLAY• PAUSE TUNING STOP TUNING RDS NEWSCLOCK SHUFFLE REPEAT REVMODEBAND SIDE A/B IRSENSOR NEXT PREV Setting TIMER • The unit can be used as an alarm clock, whereby the CD, tape or tuner is switched on at a set time. The clock time needs to be set first before the timer can be used. • You can also use it to record a favourite tuner programme at a set period (REC TUN, see CASSETTE RECORDER). • During setting, if more than 90 seconds elapses without a button being pressed the unit quits the timer setting mode. 1 In any mode, press TIMER ON• OFF for 2 seconds or more. 2 Turn VOLUME clockwise to select source. ™ Display sequence shows CD, TUNER, TAPE or REC TUNER. 3 Press TIMER ON• OFF to confirm your desired mode. ™ The selected source is shown. Display sequence scrolls SET ON TIME and TIMER flashes. The clock digits for the hours flash. CD TUNER or 4 Turn VOLUME to set the hours: clockwise for hours up; anti-clockwise for hours down. 5 Press TIMER ON• OFF again. ™ The clock digits for the minutes flash. MC 148 / 22 page 7 6 Turn VOLUME to set the minutes: clockwise for minutes up; anti-clockwise for minutes down. 7 Press TIMER ON• OFF to confirm the time. – The timer is now set and activated. Activating and deactivating TIMER • In standby or during playback, pre...


Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category