Login:
Votes - 10, Average rating: 4.2 ( )

User manual Yamaha, model YSP-900

Manafacture: Yamaha
File size: 8.54 mb
File name:
Language of manual:rusvenfrdenl
Free link for this manual available at the bottom of the page



manual abstract


The name of the selected input source and the type of the corresponding input mode appear in the front panel display. STANDBY/ONVOLUME ++INPUT STEREO MY BEAM INPUT2 TV 21 SLEEP CH LEVEL MENU RETURNTEST ENTER SURROUND OFF SPORTS 3 4 5 6 7 8 9 0 +10 5BEAM ST+3BEAM 3BEAM MUSIC MOVIE VOL MODE AUTO SETUP INPUTMODE MACROINPUT1 AUX YSP TV/AV TV STB VCR DVD ¦ Front panel operations Press INPUT on the front panel repeatedly to toggle between TV, DVD, VCR and AUX. The name of the corresponding input source and the type of the current input mode are shown in the front panel display. ¦ Remote control operations Set the operation mode selector to YSP to switch to the operation mode of this unit and then press TV on the remote control to play back a TV program. TV/AV YSP TV VOL Name of the selected Type of the selected input source input mode Set the operation mode selector to YSP to switch to the operation mode of this unit and then press STB on the remote control to play back a satellite broadcast. TV/AV YSP STB VOL Set the operation mode selector to YSP to switch to the operation mode of this unit and then press DVD on the remote control to play back a DVD. TV/AV YSP DVD BASIC OPERATION VOL 37 En English PLAYBACK Set the operation mode selector to YSP to switch to the operation mode of this unit and then press VCR on the remote control to play back a video tape. TV/AV YSP VCR VOL Set the operation mode selector to YSP to switch to the operation mode of this unit and then press AUX on the remote control to play back a component connected to the AUX jack on the rear panel of this unit. TV/AV YSP AUX VOL Playing back sources Once an input source is selected (see page 37), you can play back the selected input source. Note This section uses a DVD player as an example of the playback source. y For details on the TV and the DVD player you are using, refer to the owner’s manual supplied with the TV and the DVD player. 1 Turn on the power of your DVD player using the remote control supplied with the DVD player. 2 Switch to the video input on your TV using the remote control supplied with the TV so that the DVD menu screen is displayed. 3 If necessary, turn down the volume of your TV until you cannot hear any sound. 4 Set the operation mode selector to YSP to switch to the operation mode of this unit. TV/AV YSP 5 Press DVD on the remote control to select DVD as the input source. DVD 6 Play back the DVD on your DVD player using the supplied remote control. Audio signals from your DVD player are output from this unit. y • You can check the digital signal being input at the DVD player with the digital connection (optical/coaxial). Press ST+3BEAM on the remote control while playing back a DVD recorded in 5.1 channel. The DIGITAL or indicator lights up when this unit detects the 5.1 channel signal input at the optical/ coaxial jack. If the PCM indicator lights up, confirm the settings of the digital output, bitstream output, and/or DTS output of the DVD player. • If the output volume is too low, increase the volume on this unit to around 45. • If you have set the appropriate remote control codes for your TV and DVD player, you can use the remote control supplied with this unit to operate these components. For details on how to set remote control codes, see page 77. 38 En PLAYBACK Adjusting the volume Muting the sound STANDBY/ONVOLUME ++INPUT TV VOLVOLUME MUTE TV INPUT TV MUTE CODE SET CH Press VOLUME +/– on the front panel or on the TV VOLVOLUME MUTE TV INPUT TV MUTE CODE SET CH MUTE VOL remote control to increase or decrease the volume level. The numeric value of the volume level appears in the front panel display. Control range: MIN (minimum), 01 to 99, MAX (maximum) VOLUME VOLUME or + ++ Front panel Remote control 1 Press MUTE on the remote control to mute the sound. AUDIO MUTE ON appears in the front panel display, and the volume level indicator flashes. Flashes 2 Press MUTE on the remote control again (or press VOLUME +/–) to resume the sound output. AUDIO MUTE OFF appears temporarily in the front panel display (or the numeric value of the current volume level appears if you press VOLUME +/–), and the volume level indicator lights up. VOLUME MUTE or VOL BASIC OPERATION VOL Notes • The volume level of all input sources (including multi-channel as well as stereo sources) changes at the same time. • One of the volume level increases or decreases each time you press VOLUME +/–. • You can continuously increase or decrease the volume level if you press and hold VOLUME +/–. Lights up VOL Note The sound output of all input sources (including multi-channel as well as stereo sources) is muted at the same time. y You can select whether the sound output is to be muted completely or by 20 dB when you press MUTE (see page 64). English 39 En ENJOYING SURROUND SOUND ENJOYING SURROUND SOUND You can enjoy multi channel surround sound by changing the beam mode using the beam mode buttons on the remote control. Select 3 beam, 5 beam and stereo plu...


Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category