Login:
Votes - 4, Average rating: 5 ( )

User manual Hyundai, model H-1613

Manafacture: Hyundai
File size: 550.79 kb
File name: Hyundai-H-1613-Pdf-Rus.Pdf
Language of manual:ruen
Photos and specs  Hyundai  H-1613
Free link for this manual available at the bottom of the page



Other manuals for this model:
Radios - H-1613 (525.56 kb)ruen

manual abstract


Please observe correct battery polarities or the set will not work. • Close the battery compartment cover. • When the battery is exhausted, it should be removed from the set to prevent leakage. Note: When replacing batteries the stored information will be lost. Use External Power Please use output DC 3 V 300mA regulating external direct current power, check the positive and negative of the plug GKs-O Radio Operation_ Power Switch Press the power switch/Sleep OFF button once to turn on the radio, the last band frequency before turning off the radio is displayed. Press the power switch button again to turn off the radio, the time is displayed. Adjust Volume • The radio is with electric volume function, do not listen with highest volume. The volume can be set and stored. • In receiving state, press the VOL+ button / VOL- button to adjust volume, you can select your desired volume. Band Selection In receiving state, press the Band / Mode button to choose FM, MW, SW programs. Manual Search In receiving state, press the up tuning button or down tuning button to select your desired station frequency. Each press, the frequency varies one step, until the station is found. Attention: Manual searching station mode is fit to search weak signal station. Automatic Search • In receiving state, keep the up tuning button or down tuning button pressed, when you see the display frequency automatic change, let go, when there is a station, it will stop searching automatically. • In the course of automatic searching, press the up tuning or down tuning button, it will discontinue searching. Attention: • Automatic searching station mode is fit to search strong signal station. 3 • In the course of automatic searching, if the digit on the display screen varies slowly, it means that there is weak signal station nearby, you can change to use manual to search station. Frequency Change Law • Receiving FM, press the up tuning or down tuning button once, the frequency increases or decreases 0.1 MHz. • Receiving SW, press the up tuning or down tuning button once, the frequency increases or decreases 0.005 MHz. • Receiving MW, press the up tuning or down tuning button once, the frequency increases or decreases 9 KHz. Store Scan In receiving state, press the store scan/Alarm ON button once, it will begin to scan station, in the course of searching, when there is a station, it will store it automatically, and then hold on. In the course of automatic scanning, press the store scan/Alarm ON button once again, it will discontinue scan. Attention: • In the course of automatic scanning, if not clear, please change to use manual to search station. • When using the store scan function, the old frequency will be covered with the new station Store Stations • You can use one of the methods of auto, manual and direct input station to receive station frequency. • Press the store station button, the "PRESS" is flashing on the display screen. • Press the Memory + or the Memory -to within 5 seconds to select stored address. Press the store stations button again to confirm the stored address, the station frequency has been stored in the address. Attention: You can store 10 stations in each band. If in 1-10 address the station frequency already exists, store new frequency according to the abovementioned methods, the old frequency will be cancelled. Using Stored Stations In receiving state, press the Band Change-over/Mode button to select band, press the Memory + or the Memory - button to select the station which is saved in the memory. Lock Switch The button lock switch is set in the radio to avoid mis-operation. Before to the use, please check the lock function. After selecting the station or turning off the radio, please press the lock switch, the " " will display, the buttons on the surface do not function. Earphones Socket For private listening please insert the earphones in the Earphone socket (the speaker inside the radio disconnects automatically), you can listen to the radio by earphones. Night Illumination Button The button on the face all have illumination function, press any of them and the lamp lights up, it will automatically go out after several seconds, which is convenient for you to operate the radio in darkness. 4 Supporting Buckle It is convenient for you to place the radio. Use Reset Button The microcomputer chip is used to handle radio signal in the unit, when you change battery or change-over external power, mis-operate, or the radio is jammed, the microcomputer chip in the unit may come into in the state of dead cycle, it is out of order. At this time only the night illumination lamp functions. The main signs of dead cycle: • There is no display on the display screen, and you cannot turn on the radio when you press the power switch. • There is display on the display screen, but the buttons do not function. • After the radio is turned on, the display is confusing on the display scree...


Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category