Votes - 2, Average rating: 4 ( )

User manual Airlink, model UG-ASW116-1103

Manafacture: Airlink
File size: 48.34 kb
File name: c2e2ffe7-90f0-49ac-9937-6b1ae3cb4de0.pdf
Language of manual:en
Free link for this manual available at the bottom of the page

manual abstract

Unpacking Open the shipping carton and carefully unpack the contents. The carton contains the following items: • One the 16-port 10/100Mbps Fast Ethernet Switch • One external power adapter • Four rubber feet to be used for shock cushioning • This User's Guide AirLink+ 16-Port 10/100Mbps Fast Ethernet Switch (Desktop) User Guide If any item is missing or damaged, contact your local reseller for replacement. Installation The site where you install the Switch may greatly affect its performance. When installing, consider the following pointers: • Install the Switch in a fairly cool and dry place. See Technical Specification for the acceptable operating temperature and humidity ranges. • Install the Switch in a site free from strong electromagnetic source, vibration, dust, and direct sunlight. • Leave at least 10cm of space at the left and right hand side of the Switch for ventilation. • Visually inspect the DC power jack and make sure that it is fully secured to the power adapter. External Components This section identifies all the major external components of the switch. Both the front and rear panel is shown, followed by a description of each panel's feature. Front Panel Figure 1 shows the Switch’s front panel. Figure 1. Switch Front Panel 16-Port 10/100-Mbps Ethernet Switch Power 12345678 9 10111213141516 Link 100 Mbps 100 Mbps Link ACT ACT AirLink+ 16-Port 10/100Mbps Fast Ethernet Switch (Desktop) User Guide LED Indicator Panel The LED indicator panel contains the following indicators: • Power PowerPowerPowerPowerPower (PWR) (PWR)(PWR)(PWR)(PWR)(PWR).This indicator lights green when the switch is receiving power , otherwise, it is off. • Link/Activity (green) Link/Activity (green)Link/Activity (green)Link/Activity (green)Link/Activity (green)Link/Activity (green).This indicator lights up green when the port is connected to a Fast Ethernet or Ethernet station. If this indicator is blinking green, the Switch is transmitting or receiving data. • 100 Mbps (green) 100 Mbps (green)100 Mbps (green)100 Mbps (green)100 Mbps (green)100 Mbps (green).This indicator lights up green when the port is connected to a 100-Mbps Fast Ethernet station. Otherwise, the LED is off when the port is connected to a 10-Mbps Ethernet station. Rear Panel Figure 2 shows the Switch’s rear panel. The rear panel includes the twisted-pair ports and the DC power jack. Figure 2. Switch Rear Panel Twisted Pair Jacks 16 15 14 13 8 7 6 5 12 11 10 9 4 3 2 1 . + 7.5-V DC/1 A DC Power Jack Twisted-Pair Ports These ports supports automatic MDI/MDIX crossover detection function gives true ‘plug and play' capability without the need of confusing crossover cables or crossover ports. 10 AirLink+ 16-Port 10/100Mbps Fast Ethernet Switch (Desktop) User Guide With the Auto-MDI function, you just need to plug-in the network cable to the hub directly and no need to care if the end node is NIC (Network Interface Card) or switches and hubs. DC Power Jack Power is supplied through an external AC power adapter. Check the technical specification section for information about the AC power input voltage. Since the switch does not include a power switch, plugging its power adapter into a power outlet will immediately power it on. AirLink+ 11 16-Port 10/100Mbps Fast Ethernet Switch (Desktop) User Guide Technical Specifications Tables 1 to 3 provide Switch specifications. Table 1. General Specifications Feature Description Standards IEEE 802.3 10 Base-T ethernet IEEE 802.3a 100 Base-TX fast ethernet IEEE 802.3x flow control Protocol CSMA/CD Data transfer rate Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex) Fast ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex) Topology Star Network cables 10 Base-T: Two-pair UTP Cat. 3, 4, 5; EIA/TIA-568 100-. STP 100 Base-TX: Two-pair UTP Cat. 5; EIA/TIA-568 100-. STP Number of ports 16 . 10/100 Mbps auto-MDI/MDI-X ports 12 AirLink+ 16-Port 10/100Mbps Fast Ethernet Switch (Desktop) User Guide Table 2. Physical & Environmental Specifications Feature Specification DC inputs 7.5 V, 1 A Power consumption 6 watts (maximum) Temperature Operating: 0° to 40° C Storage: .10° to 70° C Humidity Operating: 10 to 90% Storage: 5 to 90% Dimensions 184 . 124 . 44 mm (W . H . D) EMI FCC Class A, CE Mark Class A, VCCI Class A AirLink+ 13 16-Port 10/100Mbps Fast Ethernet Switch (Desktop) User Guide Table 3. Performance Specifications Feature Specification Transmission method Store-and-forward RAM buffer 512 Kbytes per device Filtering address table 8K entries per device Packet filtering/ forwarding rate 10Mbps ethernet: 14,880/pps 100Mbps fast ethernet: 148,800/pps MAC address learning Automatic update Technical Support E-mail: support@airlinkplus.com Toll Free: 1-888-746-3238 Web Site: 14 AirLink+ 16-Port 10/100Mbps Fast Ethernet Switch (Desktop) User Guide AirLink+ 15 16-Port 10/100Mbps Fast Ethernet Switch (Desktop) User Guide Copyright . 2003 AirLink+. All rights reserved. AirLink+, the stylized AirLink+ logo, speci...


Your review
Your name:
Please, enter two numbers from picture: