Login:
Votes - 1, Average rating: 4 ( )

User manual HP, model HP 1910 Switch Series

Manafacture: HP
File size: 1.68 mb
File name:
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


Table 1 HP 1910 Switch Series models Product code HP description Alias Non-PoE JE005A HP V1910-16G Switch V1910-16G JE006A HP V1910-24G Switch V1910-24G JE009A HP V1910-48G Switch V1910-48G JG348A HP 1910-8G Switch 1910-8G PoE JE007A HP V1910-24G-PoE (365W) Switch V1910-24G-PoE (365W) JE008A HP V1910-24G-PoE (170W) Switch V1910-24G-PoE (170W) JG349A HP 1910-8G-PoE+ (65W) Switch 1910-8G-PoE+ (65W) JG350A HP 1910-8G-PoE+ (180W) Switch 1910-8G-PoE+ (180W) IMPORTANT: For regulatory identification purposes, the HP 1910-8G Switch, HP 1910-8G-PoE+ (65W) Switch, and HP 1910-8G-PoE+ (180W) Switch products are assigned Regulatory Model Numbers (RMN). The Regulatory Model Numbers for these products are listed below. These regulatory numbers should not be confused with the marketing names HP 1910, or product numbers JG348A, JG349A, and JG350A. Table 2 Regulatory Model Numbers in the HP 1910-8G Switch Series Product code RMN HP description JG348A BJNGA-AD0006 HP 1910-8G Switch JG349A BJNGA-AD0007 HP 1910-8G-PoE+ (65W) Switch JG350A BJNGA-AD0008 HP 1910-8G-PoE+ (180W) Switch This chapter describes the chassis panel views of the HP 1910 switches. 2 V1910-16G panel views Figure 1 Front panel (1) 10/100/1000Base-T auto-sensing Ethernet port (2) 1000Base-X SFP port (3) Console port (4) Port LED (5) Power LED (Power) Figure 2 Rear panel (1) AC-input power receptacle (2) Grounding screw V1910-24G panel views Figure 3 Front panel (1) 10/100/1000Base-T auto-sensing Ethernet port (2) 1000Base-X SFP port (3) Console port (4) Port LED (5) Power LED (Power) Figure 4 Rear panel (1) AC-input power receptacle (2) Grounding screw 1 2 3 V1910-48G panel views Figure 5 Front panel (1) 10/100/1000Base-T auto-sensing Ethernet port (2) 10/100/1000Base-T Ethernet port LED (3) Console port (4) Power LED (Power) (5) 1000Base-X SFP port (6) 1000Base-X SFP port LED Figure 6 Rear panel (1) AC-input power receptacle (2) Grounding screw V1910-24G-PoE (170W) panel views Figure 7 Front panel (1) 10/100/1000Base-T auto-sensing Ethernet port (2) Port LED mode switching button (3) Port LED (4) Power LED (Power) (5) Port mode LED (6) Console port (7) 1000Base-X SFP port 4 Figure 8 Rear panel (1) AC-input power receptacle (2) Grounding screw V1910-24G-PoE (365W) panel views Figure 9 Front panel (1) 10/100/1000Base-T auto-sensing Ethernet port (2) Port LED mode switching button (3) RPS status LED (RPS) (4) Port LED (5) Power LED (Power) (6) Port mode LED (7) Console port (8) 1000Base-X SFP port Figure 10 Rear panel (1) DC receptacle (2) Screw hole of the plug (3) AC-input power receptacle (4) Grounding screw 1910-8G panel views Figure 11 Front panel (1) 10/100/1000Base-T auto-sensing Ethernet port (2) 1000Base-X SFP port (3) Console port (4) Port LED 5 (5) Power LED (Power) Figure 12 Rear panel (1) AC-input power receptacle (2) Grounding screw 1910-8G-PoE+ (65W) panel views Figure 13 Front panel (1) 10/100/1000Base-T auto-sensing Ethernet port (2) Port LED mode switching button (3) Port LED (4) Power LED (Power) (5) Port mode LED (6) Console port (7) 1000Base-X SFP port Figure 14 Rear panel (1) AC-input power receptacle (2) Grounding screw 5 4 1 2 3 7 6 6 1910-8G-PoE+ (180W) panel views Figure 15 Front panel (1) 10/100/1000Base-T auto-sensing Ethernet port (2) Port LED mode switching button (3) Port LED (4) Power LED (Power) (5) Port mode LED (6) Console port (7) 1000Base-X SFP port Figure 16 Rear panel (1) AC-input power receptacle (2) Grounding screw 7 Preparing for installation Safety recommendations To avoid any equipment damage or bodily injury caused by improper use, read the following safety recommendations before installation. Note that the recommendations do not cover every possible hazardous condition. • Before cleaning the switch, unplug all power cords. Do not clean the switch with wet cloth or liquid. • Do not place the switch near water or in a damp environment. Prevent water or moisture from entering the switch chassis. • Do not place the switch on an unstable case or desk. The switch might be severely damaged in case of a fall. • Ensure proper ventilation of the equipment room and keep the air inlet and outlet vents of the switch free of obstruction. • Make sure that the operating voltage is in the required range. • To avoid electrical shocks, do not open the chassis while the switch is operating or when the switch is just powered off. • When replacing FRUs, wear an ESD-preventive wrist strap to avoid damaging the units. Examining the installation site The HP 1910 switches must be used indoors. You can mount your switch in a rack or on a workbench, but make sure: • Adequate clearance is reserved at the air inlet and exhaust vents for ventilation. • The rack or workbench has a good ventilation system. • The rack is sturdy enough to support the switch and its accessories. • The rack or workbench is well earthed. To ensure normal operation and long service life of your switch, install it in an environment that meets the requirements described i...


Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category