Login:
Sorted: Name ↑   Downloads   Rate   Size ↑  
downloaded: 0   File size: 696 kb   Manafacture: Hitachi  
Category: Power Screwdrivers and Drills
@name@name@name

Incorrect reassembly may result in a risk of electric shock or fire. 12. To reduce risk of electric shock, unplug charger from receptacle before attempting any maintenance or cleaning. Removing the battery will not reduce this risk. IMPORTANT SAFETY INSTRUCTIONS FOR USE OF THE BATTERY AND BATTERY CHARGER You must charge the battery before you can use the cordless hammer drill. Before using the model UC24YFA/UC24YF battery charger, be sure to read all instructions and cautionary statements on it,

downloaded: 2   File size: 452 kb   Manafacture: Harbor Freight Tools  
Category: Power Screwdrivers and Drills
@name

When the Battery Pack requires recharging, a 3. 3-5 hour charge allows the tool to operate at full power. Charging room temperature: 50° F. – 104° F.4. Depress both buttons at the rear of each side of the Battery Pack and slide unit back 5. to detach from the Drill. Plug Battery Pack into Adapter (30) the same way it plugs into the Cordless Drill, then slide Adapter onto Charger (29), and plug the Charger into the nearest 120 volt, grounded, electrical outlet. While charging, the Battery Pack, C

downloaded: 0   File size: 172 kb   Manafacture: NEC  
Category: Power Screwdrivers and Drills
@name@name@name

0779-20 0799-20 TO REDUCE THE RISK OF INJURY, USER MUST READ OPERATOR'S MANUAL. AFIN DE REDUIRE LE RISQUE DOIT LIRE LE MANUEL DE L'UTILISATEUR. PARA REDUCIR EL RIESGO DE LESIONES, USUARIO DEBE MANUAL DEL OPERADOR. IMPACT WRENCH CLE A PERCUSSION LLAVE DE IMPACTO DE 1. Keep work area clean and well lit. Cluttered or dark areas invite accidents. 2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ig

downloaded: 0   File size: 219 kb   Manafacture: Fisher-Price  
Category: Power Screwdrivers and Drills
@name

Requires three “AA” batteries (included) for operation. Adult assembly is required for battery replacement. Tools required for battery replacement: Phillips screwdriver (not included). sher-price.com Battery Replacement For best performance, we recommend replacing the batteries that came with this toy with three, new “AA” (LR6) alkaline batteries. 1 3 • Open the fasteners on the bottom of the ball. 2 Sound Box • Lift the fabric tab and remove the sound box. • Loosen the screws in the sound box b

downloaded: 1   File size: 317 kb   Manafacture: Aztech Systems  
Category: Power Screwdrivers and Drills
@name

8. Using the End Plug Wrench (21), thread the assembled End Cap, o-ring end leading, into the piston end of the Housing and tighten it. 9. Wrap the threads of the Swivel Sets (18) with Teflon tape and thread the swivel with the male hose Coupler (19) into the center of the End Cap. Thread the Swivel with the female Coupler into the hole in the Housing directly above the End Cap. Assembly of the TX-2, TX-4, and TX-8 Cylinder Assemblies 1. Grasp the link retaining pin lug in copper-covered, vise j

downloaded: 0   File size: 134 kb   Manafacture: Black & Decker  
Category: Power Screwdrivers and Drills
@name@name@name

The RBRC™ program provides a convenient alternative to placing spent nickel-cadmium battery packs into the trash or municipal waste stream which is illegal in some areas. The RBRC™program makes it easy for you to drop off the spent battery pack at local retailers of replacement nickel-cadmium batteries. You may also contact your local recycling center for information on where to return the spent battery pack. RBRC™ is a trademark of the Rechargeable Battery Recycling Corporation.. Battery Remova

downloaded: 2   File size: 148 kb   Manafacture: Lance Industries  
Category: Power Screwdrivers and Drills

downloaded: 0   File size: 207 kb   Manafacture: Pittsburgh Corning  
Category: Power Screwdrivers and Drills
@name

Failure to do so can result in serious injury. Save this manual. Copyright© 2009 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be

downloaded: 0   File size: 207 kb   Manafacture: Pittsburgh Corning  
Category: Power Screwdrivers and Drills
@name

Select the desired socket and verify 3. it fits properly on the nut or bolt being tightened. Press the socket firmly onto the drive 4. anvil. Lock Knob 5. Turn the Lock Knob at bottom of the Handle counterclockwise until it stops. Turn the handle to set the torque. To 6. set to 55, for example: 5020189(A) 706080 a. Turn the knurled handle (CW or CCW) until the “0” graduation on the bevel edge lines up with 50. See illustration (A), above. 5075634(B) The 50 line is shown in grey because it will l

downloaded: 0   File size: 207 kb   Manafacture: Pittsburgh Corning  
Category: Power Screwdrivers and Drills
@name

Do not drop. Inspect before every use; do not use 5. if damaged or parts loose. Keep away from children.6. For your safety, service, calibration, 7. and maintenance should be performed regularly by a qualified technician. Use only sockets with the correct 8. drive and rated to at least the torque that will be applied to it. Specifications Model 2696 807 Torque Range 20-200 in-lb 5-80 ft-lb Drive 1/4” 3/8” Length 11” 14-1/4” Accuracy ±4% Model 239 808 3293 Torque Range (ft-lb) 20-150 50-300 100-6





Category